4 Square shiny coaster molds with engraved corners
Click here to view a tutorial and demolding video
Size 11 cm x 6 mm thick
These molds take 77 grams of resin
These molds are made with a high quality Platinum-cured silicone that is highly elastic and sturdy. Degassed with a vacuum chamber and can be used in a pressure pot.
The mold is 100% handmade to order, so please note that i will need a maximum of up to five days to process your order.
Care instructions
All silicones are sensitive to Epoxy resins and other chemicals. Please always follow the instructions for the epoxy resin product you are using. The quality and care will determine the life expansion of the mold. I strongly advise to avoid using a torch or heatgun as this could lead to breaking down the silicone and causing it to fuse to the epoxy resin and tear the mold when demolding.
Do not use any sharp objects as this could scratch or damage the surface of the mold.
After demolding store them in a dust-free area or cover them with kitchen foil or place them in a ziplock bag. You can easily use tape to remove any dirt if needed. You could use water and soap but avoid using anything that could scratch the surface and make sure to dry well so no water drop marks will remain.
Handle with love and care and it will make you fall in love with each piece you create.